St. Anthony Home Builders
Independent research on building a custom home in St. Anthony, Idaho — who builds here, which desk issues your permit, and what it costs.
Call or text (208) 656-1745 — a real local line, answered by a person

Published

Who can design your Idaho house: the residence exemption architects get, and the engineering law that has none

Idaho law splits the answer. The architects' chapter exempts residences not exceeding three units or three stories from its license requirement. The professional-engineering chapter has no residence exemption — engineering work offered to the public requires a license, and unlicensed practice is a misdemeanor. In St. Anthony, both chapters can touch one plan set. (208) 656-1745.

Two chapters, one question

Ask who is allowed to design a house in Idaho and you get two different answers, because two different chapters of state law govern two different professions — and they do not match. The engineering chapter opens with its purpose, and it is broad:

“To safeguard life, health and property, every person practicing or offering to practice professional engineering or professional land surveying, as herein defined, for any project physically located in this state”

— Idaho Code §54-1201. Retrieved 17 October 2026

The sentence continues into a licensing mandate — submit evidence of qualifications, be licensed — and the definition it leans on is just as broad. “Professional engineering” in Idaho means:

“any service or creative work offered to or performed for the public for any project physically located in this state”

— Idaho Code §54-1202(11). Retrieved 17 October 2026

The full definition runs through consultation, evaluation, planning, designing, and responsible charge of construction observation — wherever “the public welfare or the safeguarding of life, health, or property is concerned” — which is exactly where a roof over bedrooms lives.

The architect chapter’s residence exemption

Architects are licensed under a different chapter with a different temper. Its license requirement is personal and unambiguous:

“Every person practicing or offering to practice architecture as defined in this chapter and not otherwise exempted shall have a separate license under his own name.”

— Idaho Code §54-305. Retrieved 17 October 2026

But that phrase — “not otherwise exempted” — is where house plans live. The chapter’s exemptions section carves out residences explicitly. After a lead-in covering architectural services for any building’s erection, enlargement, alteration or repair, the carve-out reads:

“where the building is to be or is used as a single or multiple family residence not exceeding three (3) units or three (3) stories in height; or as a farm building; or for the purpose of outbuildings or auxiliary buildings in connection with the residential or farm premises.”

— Idaho Code §54-306(3). Retrieved 17 October 2026

In plain terms:

  • For a house, a duplex, a triplex, or a farm building, Idaho does not require a licensed architect.
  • The same exemptions list also covers buildings that do not involve the public health or safety, and shop drawings prepared by trades for their own work.
  • Three units is the ceiling — a four-unit building steps out of the exemption, and so does a fourth story.

Read carefully what the exemption is not:

  • It is not a statement that houses need no design help — it is a statement about which license the state requires.
  • A jurisdiction can still demand a design professional at the permit desk.
  • Physics can still demand one at the trusses.

Both of those triggers are real in St. Anthony, and both are below.

The engineering chapter’s list — read what’s missing

Here is the asymmetry. The engineering chapter has its own exemptions section, and it exempts six things. The list, as §54-1223 prints it:

§54-1223 exemptsWhat it covers
Other licensed professionsThe practice of any profession or trade licensed under any other Idaho or federal law
Employees under a licenseeWork that excludes final engineering design decisions and is done under a licensee’s responsibility and supervision
Engineering teachersUpper-division engineering-design faculty at Idaho colleges and universities
Surveying your own landSurveying property you own, lease, or hold an interest in — except boundaries filed with a county recorder still need a licensed surveyor
Mining claimsSurvey work for locating, amending, or relocating a mining claim
Internal business useEngineering by a company’s employees for the company’s own internal use only

Now look for the line that is not there. There is no owner-built-residence exemption in the engineering chapter. An Idaho owner who may lawfully skip the architect for their house cannot lawfully perform or offer engineering services for it — not the structural design, not the snow-load analysis, not the engineered foundation. And the chapter carries an enforcement sentence with teeth:

“any person who shall violate any of the provisions of this chapter, shall be guilty of a misdemeanor.”

— Idaho Code §54-1222. Retrieved 17 October 2026

A misdemeanor means a crime — not a fine-only paperwork foul. That sentence is not ancient history, either: the legislature amended §54-1222 as recently as 2026 (chapter 221 of the session laws), so the current legislature is still tuning this exact provision.

The seal rules you can see on paper

Both chapters put their license on the drawings. For engineers, the seal rules spell out when a document is final — and how every non-final document must be marked:

“Any such document presented to a client or public or governmental agency that is not final and does not contain a seal, signature and date shall be clearly marked as "draft," "not for construction" or with similar words to distinguish the document from a final document.”

— Idaho Code §54-1215(3)(b). Retrieved 17 October 2026

Practical reading:

  • “Not for construction” on a sheet is the law’s way of saying this drawing is not the engineering — it is a study, a concept, a discussion piece.
  • The sealed, signed, dated set is the one a permit desk and a framer can rely on.
  • The architect chapter runs the same logic through its seal, which every licensed architect applies to the technical submissions issued from the office, sealing what goes out and leaving what is exempt unsealed.

Which documents your permit desk actually demands at each trigger is mapped in our page on who has to stamp plans here.

Public works: where the line is hardest

The engineering chapter also contains one absolute — the case where a professional engineer is required with no exemptions at all:

“It shall be unlawful for this state, or for any county, city, school district, irrigation district, drainage district, highway district, or other subdivision of the state having power to levy taxes or assessments against property situated therein, to engage in the construction of any public works when the public health or safety is involved unless the plans and specifications and estimates have been prepared by, and the construction reviewed by, a professional engineer.”

— Idaho Code §54-1218. Retrieved 17 October 2026

Your house is not public works. But the moment a project touches a road, a lift station, a drainage structure, or anything a public body builds or takes over, the engineer requirement is unconditional. A subdivision’s infrastructure — the streets and utilities a developer dedicates — is exactly the kind of work this section captures, which is why the plat path runs through licensed professionals: the county’s own list of plat preparers is walked in our page on who can draw your plat.

What this means for a build in St. Anthony

  • Which desk first. City limits or county ground decides the codebook and the reviewers — start with the two-desk map, because the design-professional expectations differ on each side.
  • The permit triggers. The city’s submittal and the county’s snow-load threshold both pull a registered design professional into the file — the three triggers are laid out in the plan-stamping page, against this district’s own 50 PSF snow load.
  • Trusses and barndominiums arrive engineered. Even exempt-from-architect houses almost always contain engineered pieces — truss packages from the supplier, and full engineering for steel-frame barndominiums, the lane we cover in the barndominium guide.
  • Code editions are settled law here. What the state adopts, and what the city and county each cite, is tabulated in the code-edition page and the two-code-books comparison.
  • The clock still runs. Whichever professional designs the house, the jurisdiction owes — and you should track — the written completeness response described in the ten-business-day law.

Four steps before anyone draws

  1. Name which chapter your drawings trigger. Architect services for a three-unit-or-fewer residence: exempt from that license. Engineering services: no residence exemption exists — hire the license the work requires.
  2. Check the ceilings. Three units, three stories — cross either and the architect exemption is gone. Four-plex, four-story: licensed architect territory.
  3. Demand the right marks. Final documents carry seal, signature, and date; everything else must say draft or not-for-construction. A permit set without seals is not a permit set where a seal is required.
  4. Verify the license. We could not reach the state’s online license-lookup service when we checked on October 17, 2026 — so call the licensing board for the profession before you sign, and let the seal on the drawings do the rest. We put design professionals in front of these questions every week — (208) 656-1745.

Common questions

Do I need an architect to design my house in Idaho?

No, not for most houses. Idaho Code 54-306(3) exempts buildings used as a single or multiple family residence not exceeding three units or three stories, along with farm buildings and residential outbuildings, from the architect license requirement. The exemption caps matter: four units or a fourth story loses it.

Can I design my own house in Idaho?

You can design it - the architectural side is exempt for residences within the three-unit, three-story caps. The engineering side is not: professional engineering means any service or creative work offered to or performed for the public for any project in Idaho, and the engineering chapter's exemption list contains no owner-built-residence exemption.

Can my builder draw my plans?

For an exempt residence, nothing in the architect chapter requires a licensed architect to prepare the design. But structural engineering - snow-load design, engineered foundations, steel-frame buildings - requires a licensed professional engineer regardless of who holds the pencil, and unlicensed engineering practice is a misdemeanor under 54-1222.

Why do engineers have no residence exemption in Idaho?

The statute simply does not grant one. Section 54-1223 exempts other licensed professions, work under a licensee's supervision, engineering faculty, surveying of your own property, mining-claim surveying, and internal company use - six categories, none of which is an owner-built residence.

What does 'not for construction' on a drawing mean?

It is a statutory marking. Under 54-1215(3)(b), any engineering document presented to a client or public agency that is not final and lacks a seal, signature, and date must be clearly marked 'draft,' 'not for construction,' or with similar words. It means the drawing is not the engineering - the sealed set is.

Is practicing engineering without a license a crime in Idaho?

Yes. Section 54-1222 makes any person who violates the engineering chapter guilty of a misdemeanor - a crime, not a civil paperwork foul - and the legislature amended that section as recently as 2026.

When does a public project require an engineer in Idaho?

Unconditionally, under 54-1218: the state, any county, city, school district, irrigation or highway district, or other taxing subdivision may not engage in public works construction involving public health or safety unless plans, specifications, and estimates were prepared by, and construction reviewed by, a professional engineer.

Does St. Anthony require stamped plans for a house?

It depends on the desk and the project. The city's submittal expectations and the county's snow-load threshold - the three triggers - are laid out in this site's who-stamps-your-plans page. State law adds the seal rules: final engineering documents presented to a client or agency carry seal, signature, and date.

How do I verify an Idaho engineer's or architect's license?

Through the state licensing board for the profession. The state's online license-lookup service was unreachable when we checked on October 17, 2026, so we recommend calling the board directly - and treating the seal, signature, and date on final drawings as the on-paper proof.

Want to ask something directly?

A real local line, answered by a person, with nothing to sell you.

Call or text (208) 656-1745